跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的16本指南

英语
中文

正翻译步骤 4

步骤 4
Remove the following screws from the front of the logic board: Two 23.7 mm T10 screws
  • Remove the following screws from the front of the logic board:

  • Two 23.7 mm T10 screws

  • Four 7.4 mm T10 screws

  • One 20.8 mm T25 spacer screw

  • One captive T10 screw

  • This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

移除逻辑板正面下列的螺丝。

2个23.7 mm T10螺丝

4个7.4 mm T10 screws螺丝

1个20.8 mm T25 spacer螺丝

1个 captive T10 螺丝。

这些螺丝在逻辑板的螺丝孔下方,你可能需要使用一个长的螺丝刀或者从iFixit工具包中找到60mm的延展件。

在开源创作共享许可协议下,你的投稿已被许可