跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的16本指南

英语
中文

正翻译步骤 1

步骤 1
Use the flat end of a spudger to disconnect each of the four antenna connectors from the AirPort/Bluetooth card. Note the original positions for each connector when reconnecting the cables. From left to right on the card, the antennas are connected in the following order: Leftmost
  • Use the flat end of a spudger to disconnect each of the four antenna connectors from the AirPort/Bluetooth card.

  • Note the original positions for each connector when reconnecting the cables. From left to right on the card, the antennas are connected in the following order:

  • Leftmost

  • Top

  • Upper right

  • Lower right

使用一个撬棒的平端,将四个连接AirPort和蓝牙天线的连接器断开。

当重新连接电缆时,请注意每个连接器的原始位置。从左到右在逻辑板上,天线以下列顺序连接:

左边的

顶部的

右侧上部

右侧下部

在开源创作共享许可协议下,你的投稿已被许可