Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的43本指南

英语
中文

正翻译步骤 21

Step 21
If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip. Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).
  • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

如果需要的话,可以用一张塑料卡来切割底部粘合带的剩余部分

注意不要触碰电容器的引线或电源(用红色表示)的任何暴露的焊点

在开源创作共享许可协议下,你的投稿已被许可