跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 1

步骤 1
With the camera lying with the lens facing down, use the plastic pry tool to gently lift the black tabs on the two ribbon cable attachments. Grasp the black plastic lens assembly with your fingers, and gently pull it out of the camera body from the side of the LCD display. Grasp the black plastic lens assembly with your fingers, and gently pull it out of the camera body from the side of the LCD display.
  • With the camera lying with the lens facing down, use the plastic pry tool to gently lift the black tabs on the two ribbon cable attachments.

  • Grasp the black plastic lens assembly with your fingers, and gently pull it out of the camera body from the side of the LCD display.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可