跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 2

步骤 2
Flip the LCD Assembly around the edge of the camera Note: Be careful not to rip the assembly from the camera. It is still attached by the ribbon cables! Use the plastic opening tool to gently pry up the black tab locking the large ribbon cable to the battery housing.
  • Flip the LCD Assembly around the edge of the camera

  • Note: Be careful not to rip the assembly from the camera. It is still attached by the ribbon cables!

  • Use the plastic opening tool to gently pry up the black tab locking the large ribbon cable to the battery housing.

  • Grasp the LCD display with your fingers and gently pull the large ribbon cable out of the connector.

  • The LCD display is now detached from the camera.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可