跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 1

步骤 1
Flip the netbook over so you are looking at the bottom, and locate the two screws that hold the memory card cover. Next, take a Phillips PH1 screwdriver and unscrew the two screws. These screws will not release from the cover once they are unscrewed.
  • Flip the netbook over so you are looking at the bottom, and locate the two screws that hold the memory card cover.

  • Next, take a Phillips PH1 screwdriver and unscrew the two screws.

  • These screws will not release from the cover once they are unscrewed.

  • If necessary, use the flat end of the spudger to assist in prying the cover away from the computer.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可