跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 4

步骤 4
Repeat for the second strip. If you removed both strips successfully, skip the next step.
  • Repeat for the second strip.

  • If you removed both strips successfully, skip the next step.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Do not pry against the logic board or you may damage the phone.

  • Avoid prying at the top left near the volume controls, or you may damage the volume button ribbon cable.

  • You can also try the alternative methods in the next step.

对第二根粘合条重复以上操作。

如果你成功的移去了两根粘合条,请跳过下一步。

如果电池下方的粘合剂断裂并且无法恢复,请在电池边缘下方的断裂胶带区域滴几滴高浓度(超过 90%)的异丙醇。

等待大约一分钟,让酒精溶液削弱粘合剂。 使用撬棒扁平的一端轻轻提起电池。

不要试图用力撬出电池。 如果需要,再滴几滴酒精以进一步削弱粘合剂。 切勿用撬具使电池变形或刺破。

千万不要撬动主板,否则可能会损坏手机。

避免撬动靠近音量控制的左上角,否则可能会损坏音量按钮带状电缆

你还可以在下一步中尝试其他方法。

在开源创作共享许可协议下,你的投稿已被许可