跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
意大利语

正翻译步骤 1

步骤 1
Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab. Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them. Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them.
  • Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab.

  • Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them.

Usa la punta di uno spudger tra la batteria e il jack cuffie per staccare la linguetta adesiva della batteria.

Importante: applica del calore nella parte inferiore del case usando un iOpener o uno strumento simile per ammorbidire le strisce adesive della batteria e renderle più flessibili; altrimenti potrebbero rompersi quando le tiri.

在开源创作共享许可协议下,你的投稿已被许可