跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
西班牙语

正翻译步骤 1

步骤 1
Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab. Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them. Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them.
  • Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab.

  • Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them.

Corre la punta de un spudger entre la bateria y la entrada de auriculares para desplegar la etiqueta de adhesivo de bateria.

Importante: Aplica calor a la parte de atrás de la carcasa del iPhone usando iOpener o similar, para aflojar las tiras de adhesivo y hacerlas más flexibes, en caso contrario se podrían romper cuando tires de ellas.

在开源创作共享许可协议下,你的投稿已被许可