跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Disconnect the flex connector by lifting it up with a spudger. Remove the three Phillips screws. Do not lose the washer at the bottom screw. Take out the connector board.
Remove Connector Board
  • Disconnect the flex connector by lifting it up with a spudger.

  • Remove the three Phillips screws. Do not lose the washer at the bottom screw.

  • Take out the connector board.

  • Make sure to keep the black rubber pad underneath the board.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可