跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

步骤 2
Use 1/8" allen wrench to loosen the screw inside the grip on the right side. The screw only needs to be turned a couple of times. Slide the upper frame forward on the rails and remove the screw from the slot to separate the two halves of the body.
  • Use 1/8" allen wrench to loosen the screw inside the grip on the right side.

  • The screw only needs to be turned a couple of times.

  • Slide the upper frame forward on the rails and remove the screw from the slot to separate the two halves of the body.

  • BE CAREFUL: Do not pull the two frames apart too much or too quickly. This may cause the wires to be damaged.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可