跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the following four screws securing the power supply to the outer case:
  • Remove the following four screws securing the power supply to the outer case:

  • Two 22.2 mm fine-thread T10 Torx

  • One 25 mm coarse-thread T10 Torx

  • One 9 mm coarse-thread T10 Torx

  • The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, do not touch the face of the power supply.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可