Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的32指南

英语
中文

正翻译步骤 11

Step 11
Use the flat end of a spudger to snap the front portion of the Touch ID cable bracket down over the cable connector. If the bracket does not snap down flush, you may need to remove the bracket and slide it over the cable connector again for a better fit.
  • Use the flat end of a spudger to snap the front portion of the Touch ID cable bracket down over the cable connector.

  • If the bracket does not snap down flush, you may need to remove the bracket and slide it over the cable connector again for a better fit.

使用撬棒平头的一边把 Touch ID 电线支架给撬出来。

如果支架没有很容易出来,你可能需要移除支架,并再次把支架滑过电线接口。

在开源创作共享许可协议下,你的投稿已被许可