跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的32指南

英语
意大利语

正翻译步骤 10

步骤 10
During reassembly, you will need to reinstall the Touch ID cable bracket. The top of the bracket needs to slide between the battery and Touch ID cable connector, in front of the metal tab. The bottom must latch down over the connector. Slide the top of the bracket over the Touch ID cable connector from left to right.
  • During reassembly, you will need to reinstall the Touch ID cable bracket. The top of the bracket needs to slide between the battery and Touch ID cable connector, in front of the metal tab. The bottom must latch down over the connector.

  • Slide the top of the bracket over the Touch ID cable connector from left to right.

Nel corso del rimontaggio, dovrai reinstallare la staffa del cavo del Touch ID. La parte superiore della staffa deve scorrere tra la batteria e il connettore del cavo del Touch ID, davanti alla linguetta di metallo. La parte inferiore deve richiudersi sopra il connettore.

Fai scorrere la parte superiore della staffa sopra il connettore del cavo del Touch ID da sinistra verso destra.

在开源创作共享许可协议下,你的投稿已被许可