跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
Make sure the back of the phone is facing upwards like the image on the left. Remove all three screws highlighted in the image by turning them counter-clockwise using the T6 Torx Screwdriver.
  • Make sure the back of the phone is facing upwards like the image on the left.

  • Remove all three screws highlighted in the image by turning them counter-clockwise using the T6 Torx Screwdriver.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可