跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南

英语
中文

正翻译步骤 2

步骤 2
Flip up the retaining flap on the LCD ribbon cable ZIF connector. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.
  • Flip up the retaining flap on the LCD ribbon cable ZIF connector.

  • Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可