跳转到主内容
英语
西班牙语

正翻译步骤 9

步骤 9
Pull off the 3D analog stick gently to ensure that all solder connections are unsoldered. Remove the analog stick Put the new 3D analog stick in place. Make sure that it is seated flush against the board.
  • Pull off the 3D analog stick gently to ensure that all solder connections are unsoldered.

  • Remove the analog stick

  • Put the new 3D analog stick in place. Make sure that it is seated flush against the board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可