注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的24本指南

英语
中文

正翻译步骤 3

步骤 3
Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac. The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board. The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.
  • Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

  • The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.

从iMac左上角处的LED驱动板上的插座中拔出垂直同步电缆。

垂直同步电缆是ZIF型端子,但插座上没有锁定或挡板。 只需将电缆从其插座向iMac的光驱侧拉出,即可将其与LED驱动板断开连接。

在开源创作共享许可协议下,你的投稿已被许可