跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的24指南

英语
意大利语

正翻译步骤 3

步骤 3
Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac. The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board. The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.
  • Pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

  • The vertical sync ribbon cable has a ZIF style end, but the socket has no lock or retaining flap. Simply pull the cable away from its socket toward the optical drive side of the iMac to disconnect it from the LED driver board.

Estrai il cavo piatto della sincronizzazione verticale dal suo zoccolo sulla scheda di azionamento LED, vicino all'angolo superiore sinistro dell'iMac.

Il cavo piatto della sincronizzazione verticale ha un'estremità di tipo ZIF, ma il suo zoccolo non dispone di un sistema di blocco o di un'aletta di fissaggio. Tira semplicemente il cavo dalla presa verso il lato dell'unità ottica dell'iMac per scollegarlo dalla scheda del driver LED.

在开源创作共享许可协议下,你的投稿已被许可