跳转到主内容
英语
中文

正翻译步骤 17

步骤 17
The LCD prevents the connector from the digitizer cable to fit through the opening. It will be necessary to remove the LCD. Turn the display assembly face down. Warm the back of the LCD with a hot air source until the adhesive softens. Turn the assembly over and use an opening tool to remove the LCD from the frame.
  • The LCD prevents the connector from the digitizer cable to fit through the opening. It will be necessary to remove the LCD.

  • Turn the display assembly face down. Warm the back of the LCD with a hot air source until the adhesive softens.

  • Turn the assembly over and use an opening tool to remove the LCD from the frame.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可