跳转到主内容
英语
中文

正翻译步骤 16

步骤 16
Keep moving it so that the sides are about equally hot. Use a plastic opening tool at the bottom of the digitizer and move it along the outside to the top. Only move along the outside of the digitizer, do not insert the opening tool to deep since it could scratch the LCD.
  • Keep moving it so that the sides are about equally hot.

  • Use a plastic opening tool at the bottom of the digitizer and move it along the outside to the top.

  • Only move along the outside of the digitizer, do not insert the opening tool to deep since it could scratch the LCD.

  • The digitizer can not yet be removed since the ribbon cable is still attached to the assembly. It can not be pulled out since the opening is partially blocked by the LCD.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可