跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
Reattach the strain relief. It needs to fit under the two lugs on the circuit board above the solder points for the braid and core.
  • Reattach the strain relief. It needs to fit under the two lugs on the circuit board above the solder points for the braid and core.

  • This is just visible on the left hand side of the core in the picture. The right hand tab is a bit short of the tab on the right because I didn't get the cable decently centred!

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可