跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Solder the core on to the opposite side to the chip (in the opposite corner).
  • Solder the core on to the opposite side to the chip (in the opposite corner).

  • Cut two pieces of the smallest heatshrink - roughly 4mm long.

  • Slide on to the braid leaving roughly 3mm of braid free at the end where it joins the cable.

  • Shrink in to place. If your heat gun is a bit powerful, use the soldering iron to supply the heat.

  • Cut off the braids leaving about 3mm free beyond the heatshrink.

  • Solder the first braid on to the chip side in the opposite corner to the chip.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可