翻译步骤＃5 - MacBook Pro 15" Unibody Mid 2009 Logic Board Replacement

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。

英语

中文

正翻译步骤 5

步骤 5

The camera cable connector is not secured by any locking or snapping mechanism. Hence, Apple sticks a small strip of black plastic with adhesive applied to the side facing the logic board behind the camera cable connector to keep it in its socket.
When moving the strip (cable retainer) out of the way, be sure not to break any surface-mounted components off the logic board.
Hold the end of the cable retainer down with one finger while you use the tip of a spudger to slightly lift the other end and rotate it away from the camera cable connector.
Disconnect the camera cable by pulling the male end straight away from its socket.
Pull the connector parallel to the face of the logic board, not straight up.

在开源创作共享许可协议下，你的投稿已被许可。