跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 4

步骤 4
This step is only required if you have an anti-glare display. If you have a glossy display, skip to step 12. Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
  • This step is only required if you have an anti-glare display. If you have a glossy display, skip to step 12.

  • Disconnect the Bluetooth cable by pulling the male end straight away from its socket.

  • Pull the connector parallel to the face of the logic board, not straight up.

  • Use the flat end of a spudger to pry the Bluetooth antenna cable up from its socket on the board.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可