跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module. When released, the RAM module will pop up at a slight angle. Lift the RAM module to an angle of about 30 degrees and slide it out.
RAM Module #1
  • Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.

  • When released, the RAM module will pop up at a slight angle.

  • Lift the RAM module to an angle of about 30 degrees and slide it out.

  • When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge.

  • To install a new RAM module, slide it in place at about the same angle until it is snug, and then swing it downward until the two clips snap into place.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可