修复你的物品 社区 商店

Desconexión de la batería

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南。

返回指南
英语
西班牙语
上一步

正翻译步骤 5

步骤 5
Battery Disconnection, Disconnect the battery: 步骤 0 中的图像 1，2 Battery Disconnection, Disconnect the battery: 步骤 0 中的图像 2，2
Disconnect the battery

  • Insert the point of a spudger under the edge of the battery connector head opposite of the cable.

  • There's a surface-mounted component close to the connector. Be careful not to touch it with your spudger!

  • Lift up the connector with the spudger to separate the rest of the coating and disconnect the battery.

  • During reassembly:

  • Inspect the connector head and its socket for any remaining coating that could prevent a good connection.

  • Peel off the coating, heating the area when the coating becomes too brittle.

  • It doesn't have to look pretty! You just need to remove enough coating so the connector head sits properly in its socket.

Desconecta la batería

Introduce la punta de un spudger bajo el borde del cabezal del conector de batería opuesto al cable.

Hay un componente montado en https://guide-images.cdn.ifixit.com/igi/.... ¡Ten cuidado de no tocarlo con el spudger!

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。