跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 7

步骤 7
Remove three 3.1 mm Phillips screws securing the battery near the edge of the upper case.
  • Remove three 3.1 mm Phillips screws securing the battery near the edge of the upper case.

  • When reinstalling the battery, be sure to install these three screws before proceeding to fasten the Tri-Wing screws. Keep an eye on the keyboard ribbon cable, you may need to use the flat of the spudger to hold the ribbon cable out of the path of the battery as it swings down into place.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可