跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Use the flat end of a spudger to gently pry between the flash assembly and back cover to separate the adhesive. Remove the flash assembly from the back cover. You may also need to transfer the camera lens and the silicon pad from the rear case. These can be removed by prying carefully with a plastic opening tool.
  • Use the flat end of a spudger to gently pry between the flash assembly and back cover to separate the adhesive.

  • Remove the flash assembly from the back cover.

  • You may also need to transfer the camera lens and the silicon pad from the rear case. These can be removed by prying carefully with a plastic opening tool.

  • Depending on the adhesive on the rear case, you may need to tape the flash assembly down to secure it.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可