Skip to main content
英语
中文

正翻译步骤 3

Step 3
Using a small flathead screwdriver, gently break the seal between the white plastic backing and the metal top. Pry up the corner with the screwdriver Place the rubber foot back in place.
  • Using a small flathead screwdriver, gently break the seal between the white plastic backing and the metal top.

  • Pry up the corner with the screwdriver

  • Place the rubber foot back in place.

  • Squeeze closed the backing and metal (it will snap into place).

  • Click on trackpad to test.

  • Insert the battery and you are done.

  • It may happen again when you move inadvertently a sheet of paper under the trackpad contributing involuntarily to the extraction of one of the rubber feet.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可