翻译步骤＃13 - MacBook Unibody Model A1342 Logic Board Replacement - iFixit

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

英语

意大利语

上一步下一步

正翻译步骤 13

步骤 13

Remove the six 4.1 to 4.4 mm T6 Torx screws securing the logic board to the upper case.

Remove the six 4.1 to 4.4 mm T6 Torx screws securing the logic board to the upper case.
Remove the two 4.1 to 4.5 mm T6 Torx screws securing the MagSafe board to the upper case.
On some models, these screws may be T7. Be careful not to strip away the head with a smaller bit.

在开源创作共享许可协议下，你的投稿已被许可。