Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的24指南

英语
中文

正翻译步骤 1

Step 1
For precautionary purposes, we advise that you disconnect the battery connector from the logic board to avoid any electrical discharge. This step is optional and is not required.
  • For precautionary purposes, we advise that you disconnect the battery connector from the logic board to avoid any electrical discharge. This step is optional and is not required.

  • Use the flat end of a spudger to lift the battery connector up out of its socket on the logic board.

  • It may be easier to use your fingernails to lift up on both sides of the connector.

为了避免放电,我们建议您从逻辑板上断开电池连接器。这一步是可选的,不是必需的。

使用一个平头的撬棒将电池插口从主板上的插座中取出。

用指甲在插口的两侧抬起可能会更容易。

在开源创作共享许可协议下,你的投稿已被许可