跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 2

步骤 2
Insert the flat end of a spudger perpendicular to the face of the display into the gap between the front and rear bezels near the upper left corner of the display. Rotate the spudger away from the display to pry the rear bezel off the front bezel.
  • Insert the flat end of a spudger perpendicular to the face of the display into the gap between the front and rear bezels near the upper left corner of the display.

  • Rotate the spudger away from the display to pry the rear bezel off the front bezel.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可