跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
The USB board is secured to the display assembly with light adhesive. Depending on your carrier the USB board may have an additional antenna cable on the back side of the USB board. Pry very carefully and stop if you encounter resistance. Gently insert the flat end of a spudger beneath the USB board to free it from the adhesive holding it in place.
  • The USB board is secured to the display assembly with light adhesive.

  • Depending on your carrier the USB board may have an additional antenna cable on the back side of the USB board. Pry very carefully and stop if you encounter resistance.

  • Gently insert the flat end of a spudger beneath the USB board to free it from the adhesive holding it in place.

  • Go slow and be careful not to bend the board.

USB板通过一些粘合剂与显示组件相固定。

根据运营商,USB板的被面上可能还有额外的天线。请小心撬动 ,如果遇到阻力请停止。

小心地在USB板下方插入撬棒扁平的一端,来松开将其固定的粘合剂。

慢慢操作,不要弯折了电路板。

在开源创作共享许可协议下,你的投稿已被许可