菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店
返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Insert the tip of a spudger under the vibrator to free it from the adhesive holding it to the display assembly. Be careful not to immediately remove the vibrator, as its cable is also adhered to the rear of the display assembly. Use the tip of a spudger to pry the vibrator cable up from the display assembly.

  • Insert the tip of a spudger under the vibrator to free it from the adhesive holding it to the display assembly.

  • Be careful not to immediately remove the vibrator, as its cable is also adhered to the rear of the display assembly.

  • Use the tip of a spudger to pry the vibrator cable up from the display assembly.

  • Heat works as a great "persuader" here to soften the adhesive. Liberal application of heat from a heat gun will soften the adhesive. If you pry carefully, you can save and re-use the adhesive.

将一块撬棒插入振动器来将他从带有胶水的屏幕面板上分离。

注意，请不要直接去除振动器，因为它的线缆也粘附在屏幕面板的背后。

用撬棒的尖端将振动器的线缆从屏幕上分离。

加热工具是一个软化胶水的“快捷工具”。使用加热枪可以软化胶水。如果你分离胶水足够小心的话，你可以重新使用上面的胶水。

在开源创作共享许可协议下，你的投稿已被许可。