跳转到主内容
英语
中文

正翻译步骤 12

Step 12
Remove these phillips screws: To remove all 6, you will need to slide the sliding assembly to get to the center two screws. Now, using a spudger, or  flathead screwdriver, seperate the two halves of the assembly, threading the data cable through it's hole.
  • Remove these phillips screws:

  • To remove all 6, you will need to slide the sliding assembly to get to the center two screws.

  • Now, using a spudger, or flathead screwdriver, seperate the two halves of the assembly, threading the data cable through it's hole.

  • This may take a little force since a mild adhesive is applied around the rim.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可