Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

Step 1
The last section of riser main pipe will have the pump cylinder attached to the bottom.
  • The last section of riser main pipe will have the pump cylinder attached to the bottom.

  • Pull the assembly of riser main pipe and cylinder out of the well and set the assembly on a block of wood to keep the cylinder off the ground.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可