跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the above grade riser pipe. Firmly screw a T-handle onto the pump rod. If you are replacing the above ground riser main, leave the T-handle attached until you are ready to install the replacement part.
  • Remove the above grade riser pipe.

  • Firmly screw a T-handle onto the pump rod.

  • If you are replacing the above ground riser main, leave the T-handle attached until you are ready to install the replacement part.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可