跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
The volume knob is simply pressed onto the splined volume control shaft. Use a plastic opening tool to pry evenly around the edge of the volume knob until you can remove it from the chumby.
  • The volume knob is simply pressed onto the splined volume control shaft.

  • Use a plastic opening tool to pry evenly around the edge of the volume knob until you can remove it from the chumby.

  • Volume control commands are sent via a rotary encoder that translates angular degrees of rotation into binary code recognized by the board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可