跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
Remove two 4.5 mm Phillips screws from the left-hand side of the PSP. Slide off the left trigger along with the plastic bracket underneath. Carefully pry off left trigger button using opening tools.
  • Remove two 4.5 mm Phillips screws from the left-hand side of the PSP.

  • Slide off the left trigger along with the plastic bracket underneath.

  • Carefully pry off left trigger button using opening tools.

  • The button is adhered to the body. It can be re-adhered with hot glue after being pried-up, if necessary.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可