注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的18指南。
正翻译步骤 3
步骤 3
-
Remove the following 7 screws from the edges of the keyboard area.
-
Three 2 mm Phillips along the right edge.
-
One 4.5 mm Phillips underneath where the magnet was.
-
One 6 mm Phillips with a small head in the lower left corner.
-
Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。