跳转到主内容

Remplacement du boîtier supérieur de l'iBook G4 12" 800 MHz-1.2 GHz

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的18指南

英语
法语

正翻译步骤 3

步骤 3
iBook G4 12" 800 MHz-1.2 GHz Upper Case Replacement: 步骤 0 中的图像 1,1
  • Remove the following 7 screws from the edges of the keyboard area.

  • Three 2 mm Phillips along the right edge.

  • One 4.5 mm Phillips underneath where the magnet was.

  • One 6 mm Phillips with a small head in the lower left corner.

  • Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle

Retirez les 7 vis suivantes sur les bords de la zone du clavier :

Trois cruciformes de 2 mm le long du bord droit

Une cruciforme de 4,5 mm sous l'aimant

Une cruciforme de 6 mm avec une petite tête dans le coin inférieur gauche

Deux cruciformes de 6 mm avec de grandes têtes, une dans le coin supérieur gauche et une au milieu

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利