跳转到主内容
英语
中文

正翻译步骤 8

Step 8
Place the wheel on the axle followed by washer and then the nut. Tighten the nut with your fingers as much as you can first and then use the wrench to finish the job. Do not tighten the nut too much or else the wheel will not be able to spin. You should be able to slightly shake the wheel up and down along the axle.
  • Place the wheel on the axle followed by washer and then the nut.

  • Tighten the nut with your fingers as much as you can first and then use the wrench to finish the job.

  • Do not tighten the nut too much or else the wheel will not be able to spin. You should be able to slightly shake the wheel up and down along the axle.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可