注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 1
步骤 1
Remove the Controller Ports
-
Remove five Phillips #1 screws securing the metal shield to the controller ports:
-
Two 14 mm screws
-
Three 8 mm screws
[ [* black] Remove [* red] Two 14 mm screws [* yellow] Three 8 mm screws |
[ [* black] Remove [* red] Two 14 mm screws [* yellow] Three 8 mm screws |