Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
西班牙语

正翻译步骤 4

Step 4
When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Tilt the power supply forward.
  • When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Tilt the power supply forward.

Cuando trabajes con la fuente de energía, ten mucho cuidado de no tocar los conectores de los capacitores o cualquier junta soldada en la parte de atrás de la placa. Solamente agarra la placa por los bordes.

Inclina la fuente de energía hacia adelante.

在开源创作共享许可协议下,你的投稿已被许可