Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
西班牙语

正翻译步骤 1

Step 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board. Use the tip of a spudger to push each side of the power button cable connector and gently "walk" it out of its socket. Use the tip of a spudger to push each side of the power button cable connector and gently "walk" it out of its socket.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently "walk" it out of its socket.

Los pasos siguientes llevan tus manos cerca de la cara expuesta de la fuente de energía. No toques la cara de la fuente de energía para evitar una descarga de alto voltaje de los muchos capacitores de gran carga soldados a la placa.

Usa una punta de un spudger para empujar cada lado del conector del cable del botón de encendido y que lentamente "camine" fuera de su zócalo.

在开源创作共享许可协议下,你的投稿已被许可