跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 1

步骤 1
Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.
  • Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.

  • During reassembly, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可