Skip to main content
英语
中文

正翻译步骤 4

Step 4
Detach the metal piece from where it is attached to the body underneath the rubber pieces that were just removed.
  • Detach the metal piece from where it is attached to the body underneath the rubber pieces that were just removed.

  • The side of the piece that is closest to the door opening should now be loose. The whole piece should now be slid farther into the drive through the slots.

  • Once you slide the piece toward the back of the slots, the side that is still attached can be pried towards the center of the drive on each side to remove it from the slots on the door.

将金属件从刚刚拆下的橡胶件下面的主体上拆下。

最靠近光碟盖上的插槽的部分现在应该是松弛的。整个部件现在应该通过插槽进一步滑入驱动器。

将金属件向槽的后部滑动后,可以将仍然连接的一侧朝向每侧驱动器的中心进行撬动,以将其从光碟盖上的插槽中取出。

在开源创作共享许可协议下,你的投稿已被许可