跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
Push the black tab at the bottom of the speaker to pop the speaker out of place, and remove the speaker. The speaker is spring loaded, so be sure to keep an eye on it in case it starts doing flips into the air when you push the tab.  Be careful not to lose or damage it!
  • Push the black tab at the bottom of the speaker to pop the speaker out of place, and remove the speaker.

  • The speaker is spring loaded, so be sure to keep an eye on it in case it starts doing flips into the air when you push the tab. Be careful not to lose or damage it!

  • Make sure the new/replacement speaker does not spring out during reassembly.

推动扬声器底部的黑色卡榫,将扬声器弹出一个位置,然后取下扬声器。

扬声器是弹簧式的,所以一定要注意它,以防你在推动卡榫时发现扬声器在天空飞舞。小心不要丢失或损坏它!

确保新的/更换扬声器在重新组装时不会弹出。

在开源创作共享许可协议下,你的投稿已被许可