跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 7

步骤 7
Place the spring plate on the backing plate. Be very careful not to move the heat sink while you install the screws. Carefully thread one of the CPU heat sink screws slightly into the heat sink so that just a couple threads are engaged.
  • Place the spring plate on the backing plate.

  • Be very careful not to move the heat sink while you install the screws.

  • Carefully thread one of the CPU heat sink screws slightly into the heat sink so that just a couple threads are engaged.

  • Press down on the opposite corner of the spring plate from where you just installed a screw.

  • While holding the corner down, thread another screw into that corner of the heat sink, again just tightening it until a couple threads are engaged.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可